Homepage
The bidirectional RCR02 4-channel DIN rail receiver is used for potential-free activation of four mains power devices, and can be paired with 1-button and 2-button operation transmitters. 32 transmission codes can be paired with each switching output.

In addition, an Easywave neo server can be programmed into the receiver in order to use the bidirectional functionalities.

The receiver can be operated in ON/OFF, PULSE and DEAD MAN‘S SWITCH modes. ON/OFF mode also has TIMER functions and a LOGIC function.

The device is suitable for mounting to a standard DIN rail (35 x 7.5 mm).

RCR02EN5004A01-29K
Technical specifications
Coding Easywave neo
32 transmitter can be programmed per output
1 Easywave neo server can be programmed
Frequency 868,30 MHz
Channels 4
Power supply 230 V AC, 50 Hz
Power consumption 0.4 W standby
1,9 W max. without load
Operating modes ON/OFF (1-button operation)
ON/OFF (2-button operation)
PULSE
TIMER I (switching time fixed)
TIMER II (switching time adjustable)
DEAD MAN
LOGIC (2-button operation)
Outputs 2 potential-free relay contacts (normally open)
2 potential-free relay contacts (change over)
Maximum contact load ohmic load:
16.0 A / 3,680 VA

inductive load:
3.0 A / 690 VA

non- or serial-compensated florescent lamps:
3.0 A / 690 VA

parallel-compensated florescent lamps:
3.0 A / 720 VA (NO)
1,5 A / 345 VA (NC)

electronic ballast capacity:
4.0 A / 920 VA
Operating temperature -20 °C to +45 °C
Dimensions 71/90/63 mm
Scope of delivery
  • DIN-rail receiver 4HP
  • Operating manual
Accessories (optional)
ACC-ANT50-03-21P External antenna, 868 Mhz, 5m coaxial cable, clamp connection, magnetic base

ACC-ANT50-03-21P
Models
Product numbers Description
RCR02EN5004A01-29K DIN-Rail receiver, Easywave neo, 230V, 2x normally open + 2x changeover, potential-free
Wiring diagram